Cotol 240 speeds the dry time of an Aquaseal treatment for your wetsuit and helps preparing the surface.

HOW TO USE COTOL 240

As a pre-cleaner:
1. Test the area for colourfastness by apllying the liquid to one small spot first.
2. Apply a small amount to the damaged area and rub with a cloth until dry.
3. Repeat this process until the whole area is done.
4. Roughen the area with sandpaper and apply the Aquaseal.

As a cure accelerator:
1. Mix one part cure accelerator with three to four parts McNett Aquaseal (available on this website). Mix on a non-absorbent flat surface.

2. Apply the mixture to the damaged area without giving it a chance to dry first.

3. Let the sealant cure at least two hours before using your wetsuit again.

The Cotol comes in a 120ml bottle.